Then click the "Save" button at the bottom. Enter another ZIP to see info from a different area. The guest network is back this evening, and it has lasted a lot longer than 60 seconds. Setup Guides & Whether accidentally or intentionally, I cannot say. It features four gigabit Ethernet LAN ports and a 4x4 MIMO 802.11AC wireless interface. Advanced Settings: Wireless Mode 802.11n/b/g 2.4 GHz (most recommended) 5 GHz wireless band . Apple, Apple TV, App Store, Apple Watch, AirPlay, Beats, FaceTime, HomePod, iCloud, iMessage, iPhone, iPad, iPod touch, iTunes, Mac Mail, Mac OS X, and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. Skype and Surface are trademarks of Microsoft Corporation. To avoid conflicts or weird things leaking through, I went ahead and changed the network on the PACE router, since both it and the USG use the 192.168.1.x network by default. Click Rescan if Wireless channel is Auto. We're sorry that didn't solve your issue. Use Wireless Channel (bottom of Wi-Fi settings) to check what channel is recommended. Privacy Policy The Pace 5268 has two radios (2.4GHz and 5.0GHz) allowing for multiple network names (SSIDs) to be supported. Enable Wi-Fi network security - Pace 5268. Wi-Fi is a registered trademark of the Wi-Fi Alliance. In the event of an AC power outage, the Pace 5268AC residential gateway/router can utilize a rechargeable lithium-ion battery to automatically and instantaneously continues to power the router. and enter a custom password. If the PACE router doesn't restart itself after changing this setting, you may want to restart the PACE router just to make sure it will hand out the new range when you hook things up. Setting a password for your Wi-Fi home network is a smart, easy way to protect your network from unwanted users. The first thing to know is that there is no such thing as bridge mode with these routers. Your AT&T Wi-Fi gateway comes with the security. Discuss on our WP Forum. Sonic Speed Test We don't run hotspots off of our equipment like that. Get answers. The default network name and password will be the same allowing the gateway to automatically switch between the radios based on which one is able to deliver the fastest Wi-Fi speeds. that still use UPnP for port mapping. I've been going through my settings on my USG to see if there's anything in particular I have to configure to make it work well with the PACE router, but I'm not finding anything beyond my own personal preferences as far as firewall, network, etc. Get answers. Item/field Setting; Enable 5 GHz Wireless: Check this box. Wireless Mode 802.11n/b/g 2.4 GHz (most recommended), Wireless Mode 802.11a/n/ac 5GHz (most recommended). I can verify that it is intermittent, because it went away for a while yesterday evening. X | >. I've configured couple VLANs on a Cisco SG300 switch, (192.168.1.X and 192.168.2.x) and am looking to complete the setup by configuring this on the 5268 router. Disabling the Wireless Network . Product Info KM1048513-slctrgrp_pace5268ac. ), Now, navigate to Settings -> Firewall -> Applications, Pinholes and DMZ. Please note, a Pace 5268 is also provided for Fusion IP Broadband customers. The Pace 5268 is one of the Residential Gateways used for Fusion DSL and the primary gateway for Gigabit Fiber customers. The Pace 5268 has two radios (2.4GHz and 5.0GHz) allowing for multiple network names (SSIDs) to be supported. We're sorry that didn't solve your issue. The one you have probably doesn’t suck. This includes letting DHCP through, giving the public IP directly to the DMZplus host rather than forcing you to double-NAT. (300 seconds plus, before I stopped watching.) It features four gigabit Ethernet LAN ports and a 4x4 MIMO 802.11AC wireless interface. Once you do so, it should be visible in Settings -> LAN -> Status in the "Devices" section: (The name will probably match whatever your router advertises itself as in its DHCP request. After a long delay, Sonic "upgraded" me to a test firmware 10.5.4.527396-sonic, which brings new problems. Buy a dedicated router so you don't have to deal with the supplied one. It originates from us hoping to rollout the potential for guest networks in the near future. For help connecting Mac OS X wireless, visit Mac OSX Support. Configuring Subnets w/ (AT&T provided) Pace 5268AC Router. Turn on WPS for the SSID you want to connect to. Wi-Fi is a registered trademark of the Wi-Fi Alliance. Your mileage may vary, but if nothing else it makes it easier to diagnose issues when the networks aren't similarly numbered. I thought setting my modem to bridge mode was the first step and I found directions for doing that with a Pace 5268AC but mine didn't have that option, only the option to add an additional network or add a cascaded router. To avoid conflicts or weird things leaking through, I went ahead and changed the network on the PACE router, since both it and the USG use the 192.168.1.x network by default. 2Wire and Pace are registered trademarks of Pace plc. As a rule, firewalls block incoming requests to your network. Don't do it! You may have multiple network names for each band being used: 2.4GHz, 2.4GHz Guest… Help others. © Setting up In-home Wi-Fi on your Pace 5268 gateway, Use default encryption key printed on System Label. Agency Partner Program, Powered by phpBB® Forum Software © phpBB Limited. My Favorite Routers: Best Features, and Performance: https://amzn.to/2NhqM4S 9 (Amazon) Best Value, Reliability, and Low Price: https://amzn.to/2tL9u8b (Amazon) You can change either to make them easier to remember. Pace. If you have changed the security to OFF, follow these steps to turn it back on. X | >. Please note, a Pace 5268 is also provided for Fusion IP Broadband customers. Pace 5268AC CES Updated November 24, 2020 01:05. Your Wi-Fi gateway comes with a default Wi-Fi network name and password. Microsoft: Edge, Excel, Hotmail, Internet Explorer, Live Mail, Outlook, and Windows are registered trademarks of Microsoft Corporation. Page 28 The device for operation in the band 5150-5250MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. The guest network is back this evening, and it has lasted a lot longer than 60 seconds. Forums There really isn't too much to it, just a few pitfalls. The problem with a true bridge is that even if you put a gateway behind the PACE, you still need the ability to plug DVRs (or the wireless bridges used by wireless DVRs) into the modem and communicate with AT&T's network to retrieve video, guide data, etc. But if you want to manage your own network behind the router -- or in my case, disable the crappy PACE WiFi and use my own access points -- their solution is to provide a pseudo-bridge mode called "DMZplus" which gives you something reasonably close, while still allowing the other ports on your router to continue to NAT out to the internet like normal. Once you do, it should say "You have chosen ". Join the conversation! For help connecting Microsoft Windows wireless, visit Windows Wireless Help. Help others. Join the conversation! With the Pace 5268, you may have multiple network names and passwords … 5268AC. Showing Content for | Change your ZIP Code, Enter another ZIP to see info from a different area. To get extra protection, enable a WPA (Wi-Fi Protected Access) password. Select your option for personalized help. For 64-bit encryption, enter a 10-digit password made up of numbers and letters a-f or A-F. For 128-bit encryption, enter a 26-digit hexadecimal number made up of numbers and letters a-f or A-F. Enter another ZIP to see info from a different area. Now that your gateway is selected, scroll down to the "Edit firewall settings for this computer" section and click the "Allow all applications (DMZplus mode)" radio button. It works by leaving all of the existing stuff in place (the 192.168.1.x network, the NAT, etc. Meet Sonic Must be at least 8 characters. A scan with Xirrus WiFi Inspector, shows that my Sonic router is advertising an OPEN guest network in the 5GHz band called "Sonic-5574_guest".